4-axis CNC machining centre designed for working bars or parts in aluminium, PVC, light alloys in general and steel. It is equipped with two operating modes: a single work area for bars up to 7 m length or two independent work areas in double mode. The machine is equipped with independent motorized vices that allow positioning the vices in concurrent operation time during the operation in dynamic pendular mode. The 4th NC axis allows the electrospindle to rotate from –120° to +120° on the horizontal axis and position itself at any intermediate angle. The machine can therefore perform machining operations on the top and on all side faces of the profile at any angle within the range. It is equipped with a 12-place tool magazine, on the X axis gantry, able to host also one milling disc. It also has a mobile work table that facilitates the workpiece loading/unloading operation and significantly increases the workable section.
1F = 1 face machining 5F = 5 faces machining
Dimensions in mm
The tool magazine is integrated on the X axis, in the lower part and behind the electrospindle. It allows great reduction of tool change times. This function is particularly useful in the extrusion head and tail machining, avoiding the stroke to get to the magazine, as it moves simultaneously with the electrospindle and its positions. The magazine can contain up to 12 tool holders with relevant tools, which can be set at the operator’s discretion. Each position of the tool holder is provided with a sensor detecting the correct cone position.
The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.
