LILLIPUT 290 M

home / application type / Products for Aluminium

Horizontal end milling machine with manual feed. Mitre milling at 90°. Quick cutter change with manual control. Scratch-proof work table. Full guarding of work zone.

Estimate Request

Technical data

CHARACTERISTICS

Brake motor (kW)

1,1

Tool speed (rpm)

2.800

Stroke (mm)

290

Vice capacity (mm)

190 x 110

Horizontal and vertical pneumatic vices, stroke (mm)

6-position positive indexing stop

Cutter holder sleeve (mm)

Ø = 27 / 32 x 135

Max mill (mm)

Ø = 140

Micro-mist lubrication system with water and oil emulsion

Base with mill holder magazine and swarf conveyor

Included

Available

Quick tool change

Quick milling tool change, manually controlled by a lever.

Positive indexing stop

The manual 6-position positive indexing stop enables 6 measurements to be set so that the workpiece can be positioned quickly, thus reducing the time of the work cycle. It is also possible to manually adjust the height of the positive indexing stop.

Tool magazine

The tool magazine is located in the machine base so the cutters can be placed in orderly positions, thus remaining in an intact state. Its lateral position makes the pick-up operation easier.

Vices

The machine is provided with a horizontal vice and a vertical vice, both operated pneumatically. The vices are manually adjustable and ensure correct gripping of the profile.

Profile support roller conveyor (Optional)

Enables correct positioning in the machine and secure support of the profile in the machining area. Slide rollers make profile handling operations easier.