Vegamatic Pusher

home / application type / Products for Aluminium

A semiautomatic version cutting centre with 2 controlled axes, manual loading/unloading on opposite sides of the machine, with front CNC blade, dedicated to cutting Aluminium and PVC profiles and light alloys in general. It performs predefined and optimised cutting lists in automatic. Designed to execute cutting at angles ranging from 45° to 135° or from 22°30’ to 157°30’. Configurable with horizontal or vertical drilling units that can be personalised for specific automatic machining.

Estimate Request

Technical data

AXIS STROKES

U AXIS (feeder) (mm)

7.500

B AXIS (angle of blade) (according to version)

45° ÷ 135° ; 22°30’ ÷ 157°30’

LOADING UNIT: PROFILE POSITIONING

Infeed roller conveyor

Max. loadable profile length (mm)

6.850

Max. loadable profile width (mm)

190

Theoretical minimum cutting length (mm)

Minimum machinable profile section (mm)

30 x 30

CUTTING UNIT

Blade diameter at carbide-tipped (mm)

Ø = 550

Hydro-pneumatic blade feed

Minimal oil diffusion lubrication system

Power rating (kW), “three-phase” blade drive motor

Pre-set for swarf exhauster

CUTTING DIAGRAM

UNLOADING UNIT

Unloading on roller conveyor on opposite side of loading side

SAFETY DEVICES AND PROTECTIONS

Cutting area pneumatically-controlled integral protection

WORKPIECE LOCKING

Vertical pneumatic vices

Pair of horizontal pneumatic vices with pressure reducer plus pressure gauge

Vice pressure reduction with pressure gauge

Included

Available

Bar feeder

The extremely fast and precise CNC numerical control system for bar positioning includes a gripper for clamping the profile and the possibility to manually adjust the position. The movement is transmitted on a rack through a low backlash gearbox to maintain the high standards of precision guaranteed by the CNC. The feeder slides on case-hardened and tempered bars through linear bushings.

Unloading roller conveyor

Vegamatic Pusher loads profiles on the left roller conveyor and unloads them from the right roller conveyor. The in-line machining makes it possible to limit the transfer of the profile on the working bench and to reduce cycle times.

Cutting module

The cutting module consists of a single-head cutting off machine with hydro-pneumatic blade feed. It is provided with a 550 mm blade featuring wide cutting range: ffrom 45° to 135° or from 22°30’ to 157°30’ (based on model). Setting of the cutting angles is fully automatic and is handled by the CNC.

Control

The operator interface with colour LCD screen is equipped with network connection and USB ports. It also features a built-in control panel, keyboard and mouse. Possibility to install the label printer. The control is managed by the Windows operating system under which the Job and Blade software packages are installed: Job is designed for the job editor and optimizing cutting lists; Blade, installed alongside Job, controls the machine’s operations and manages the machining processes.

Label printer (Optional)

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.