Precision TS2

home / product a to z / P

Twin-head cutting-off machine with 3 controlled axes with automatic movement of the mobile head and electronic management of all 45 ° (internal) to 15° (external) angles. Blades feed driven by hydro-pneumatic cylinders. 550 mm-blade. Available with a useful cut of 5 m or 6 m in length.

Estimate Request

Technical data

MACHINE CHARACTERISTICS

Electronic control of the X axis

Standard X axis positioning speed (m/min)

Mobile head position reading with absolute magnetic strip direct measuring system

Detection of cutting unit tilting through direct measurement system with absolute magnetic strip

Electronic control of intermediate angles

Maximum internal inclination

45°

Maximum external inclination

15°

Hydropneumatic blade feed

Effective cut, according to model (mm)

4.000 / 5.000 / 6.000

Cemented carbide blade

Blade diameter (mm)

550

Blade motor power (kW)

2,64

Electronic profile thickness gauge

CUTTING DIAGRAM

SAFETY DEVICES AND PROTECTIONS

Pneumatically-operated front local protection

LUBRICATION AND SUCTION

Minimal oil diffusion lubrication system

Preparation for automatic start-up of external exhauster

Chip conveyor with rubber belt

PROFILE POSITIONING AND CLAMPING

Pair of horizontal pneumatic vices with "low pressure" device

Pair of horizontal vertical vices

Pair of additional horizontal vices

Intermediate mechanical profile support

Roller conveyor on the mobile head with servo-controlled mechanically operated profile supports

Profile support roller conveyor on fixed head for profile infeed from left

Pneumatic reference stop on the mobile head for profile infeed from left

FUNCTIONS

Perform single cuts

Execution of intermediate angles cuts

Execution of cyclical cuts from cutting lists

Special cut function PRO (longer, shorter, chamfered or wedge cut)

Semi-automatic cut function SLICE (thrust cut)

Bar optimisation

Included

Available

Head Guards

Automatic local head protections, made of scratch-resistant polycarbonate, are operated by a pneumatic cylinder with an anti-crushing device that resets the pneumatic load to zero when closing. They are mounted on a laterally sliding system to better shelter the operator in any cutting operation.

Control

The ergonomic state-of-the-art control panel features a 10.4” touchscreen display and fully customised software and is packed with functions developed in the Microsoft Windows® environment specifically for this machine. The machining cycle can be optimised by creating cutting lists, thereby reducing scrap and cycle times for workpieces loading-unloading.

Load and unload

The Precision cutting-off machine can be equipped with a roller conveyor on the mobile head, for standard feeding and unloading, or on the fixed head for feeding from the left-hand side. A pneumatic stop device on the mobile head is available to ease positioning of the profile in this loading mode.

Cutting units inclination virtual axis

Tilting of each head, up to 15° outward and 45° inward for both aluminium and PVC versions, is done by means of two circular guides placed on four pairs of steel casters. This patented solution makes it possible to eliminate obstructions in the cutting area, all to the benefit of profile positioning and clamping, while also offering greater rigidity than traditional systems. The absolute magnetic strip positioning system dispenses with the need for axes homing procedures, with the associated idle times.

Profile clamping

Making use of the ample space provided by the use of the virtual axis, clamping of the profile to be cut is performed by two horizontal hold-down devices with extreme precision and in absolute safely. For vertical clamping, particularly for special cuts, the machine can be equipped with a patented system of horizontal hold-down devices.

Label printer (Optional)

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.