Comet R4 I

home / application type / Products for Aluminium

5-axis CNC machining centre designed for working bars or parts in aluminium, PVC, light alloys in general and steel up to 4 m. The machine is equipped with independent motorized vices that allow positioning the vices in concurrent operation time. The 4th and 5th axis allow the electrospindle to continuously rotate to NC from -15° to +90° on horizontal axis and from -360° to +360° on continuous vertical axis, to perform the work on the upper side and on all the lateral sides of the profile. It is equipped with a 12-place tool magazine, on the X axis gantry, able to host also one milling disc. It also has a mobile work table that facilitates the workpiece loading/unloading operation and significantly increases the workable section.

Estimate Request

Technical data

AXIS STROKES

X AXIS (longitudinal) (mm)

3.950

Y AXIS (transversal) (mm)

1.000

Z AXIS (vertical) (mm)

450

B AXIS (rotation on electrospindle horizontal axis)

-15° ÷ +90°

C AXIS (rotation on electrospindle vertical axis)

-360° ÷ +360°

ELECTROSPINDLE

Maximum power in S1 (kW)

8,5

Maximum power in S6 (60%) (kW)

Maximum speed (rpm)

24.000

Toolholder cone

HSK - 63F

Automatic tool holder coupling

Cooling with heat exchanger

Electrospindle controlled on 5 axes with the possibility of simultaneous interpolation

WORK AREA

1F = 1 face machining 5F = 5 faces machining

	A	B	X1	Y1	Z1	X2	Y2	Z2
COMET R4 I	60	130	3.475	300	250	3.190	250	250

Dimensions in mm

TAPPING CAPACITY (with tap on aluminium and through hole)

With compensator

Stiff (optional)

M10

WORKPIECE LOCKING

Independent motorised vices

Maximum number of pneumatic vices

Standard number of pneumatic vices

AUTOMATIC TOOL MAGAZINE ON BOARD THE GANTRY

Maximum diameter of the blade that can be inserted in the magazine (mm)

Ø = 250

Maximum number of magazine tools

SAFETY DEVICES AND PROTECTIONS

Machine integral protection booth

Laminated protection glass

Retractable side protection tunnels

FUNCTIONS

Multi-piece operation

Basic multi-step machining - up to 5 steps

Extended machining, up to twice the maximum nominal length in X

Multi-piece mode machining in Y

Workpiece rotation for machining on 4 sides

Included

Available

5 axes electric head -R-

8.5 kW S1 high torque electrospindle also allows heavy duty machining, which is typical in industrial processing. As an option and for higher performances a 11 kW encoder equipped electrospindle is available for rigid tapping. Electrospindle rotation along B and C axes allows working on 5 sides of the profile, with no need of repositioning. It can be used for some types of steel extrusions as well as for aluminium profiles, thanks to the software-adjusted lubricating system. With its double tank it allows either minimum oil circulation or oil emulsion spray-mist.

Operator interface

The possibility of rotating the monitor on its vertical axis allows the operator to view the screen from any position. The user interface has a 24” touchscreen display in 16:9 format, portrait mode, equipped with the necessary USB connections for PC and CNC remote interfaces. It also features an operator panel, mouse, and it is set up for connecting barcode reader and remote operator panel.

Motorized vices

The motorized vices, each equipped with its own motor, can be positioned independently in the work area. The CNC manages the movement of vices and that of electrospindle head simultaneously, in the two different work areas in double operation mode. This enables significant productivity gains. Using absolute reference axes allows reducing the initialisation time required every time the machine is restarted.

Pneumatic stops

The machine is equipped with strong stops allowing bar reference. One is positioned on the left side (standard) and the other on the right side (optional). Each stop is activated by a pneumatic cylinder, it is retractable type and is automatically selected by the machine software according to the machining to be performed. In short, double stop offers the advantage to load more profile pieces for multi-piece mode machining as well as the possibility to reposition the bar or the piece and perform machining on particularly long profiles.

Tool magazine

The tool magazine is integrated on the X axis, in the lower part and behind the electrospindle. It allows great reduction of tool change times. This function is particularly useful in the extrusion head and tail machining, avoiding the stroke to get to the magazine, as it moves simultaneously with the electrospindle and its positions. The magazine can contain up to 12 toolholders with relevant tools, including a blade with a maximum diameter of 250 mm, which can be set at the operator’s discretion. Each position of the tool holder is provided with a sensor detecting the correct cone position.

Foldaway tunnel

Integrated with the machine’s aesthetics and design, thanks to the perforated sheet metal for transparency and lightness, the tunnel opens and closes as needed. As its length can be reduced when not in use, it helps save space at the workshop. The outlet for the chip conveyor belt and its engine are built into the lower section, in view of an aesthetic and functional design.