Stop gauge and profile support system with movement of the stop on CN axis and electronic read-out by absolute magnetic band. Equipped with an electronic measurement system that allows to save data on internal memory or transferred in real time to a PC or to the control unit of a miter saw via Bluetooth. It allows machining with high accuracy and repeatability of positioning.

Technical data arrow_drop_down
MACHINE CHARACTERISTICS  
Electronic control of the X axis
 
Plastic rolls on roll-bearings
 
Driven by servodrive with planetary gear
 
Max. stroke (mm)
3.000
Rollers width (mm)
300
Rollers diameter (mm)
50
Max loadable profile weight (kg/m)
100
Roller pitch (mm)
200
Rolls number on roller conveyor
15
Conveyor plane height (mm)
850 ÷ 1.030
Support feet number
2
Detection of moving stop position through direct measuring system with magnetic band
 
Lifting stop
 
Positioning accuracy (mm)
± 0,1
Tolerance on repeatability of measurement (mm)
± 0,1
COMMAND FEATURES 
PLC with integrated graphic colour display 15”
 
Graphic operator interface software
 
Touch screen functions
 
Loading and managing of cutting lists
 
Connection of cutting cycle progress signal
 
USB ports
1
RJ45 network card
1
Lan card WLAN
1
RS232 ports
1
ELECTRONIC MEASURING TOOL FOR GLAZING BEADS 
Minimum measurable length (mm)
150
Maximum measurable length (mm)
3.000
Resolution (mm)
0,1
Accuracy (mm)
± 0,1
Power supply batteries
4 x 1,5V AA
Nominal operation duration (hours)
150
Data recovery on internal memory
 
Data transfer via Bluetooth
 
Reference points for relative measurements
 
Included       
Available
Cutting-off machine connection kit
The support and measuring system can be combined with a wide range of machines. Through special steel bracket, the mechanical connection to the cutting machine is made precisely and rigidly.
Single head cutting-off machines Fermostop Cutting-off machine connection kit Emmegi
Single head cutting-off machines Fermostop Roller Emmegi
Roller
The profile is conveyed on rollers with a diameter of 50 mm that allow it to slide and position efficiently, avoiding surface damage.
Reference stop
Reference is ensured by a mobile stop positioned on a carriage running on a linear axis. Positioning is ensured by a toothed belt protected from swarf, controlled by servodrive, which by means of a planetary gear allows accurate positioning of the length of the workpiece to be cut with a precise reference on the centre of the blade.
Single head cutting-off machines Fermostop Reference stop Emmegi
Single head cutting-off machines Fermostop Control Emmegi
Control
Through a tested PLC, it is possible to perform the preparation of cutting lists, then allowing the repositioning of the stop sequentially and automatically. The interface uses a 10.4’’ touch-screen display and software that allows manual data input or, alternatively, import from an external source.
Enabling the import of cutting lists
The machine is preset to import cutting lists created by dedicated software. Processed files can be imported directly from a PC or mobile devices via standard interfaces, namely: USB, LAN, WLAN, RS232.
Single head cutting-off machines Fermostop Enabling the import of cutting lists Emmegi
Single head cutting-off machines Fermostop Electronic glazing bead gauge Emmegi
Electronic glazing bead gauge

Instrument for measuring the length of glazing bead profiles. It can detect dimensions in two measuring ranges: 150 mm to 2350 mm and 803 mm to 3000 mm. You can switch from one range to the other at any time by pressing a button, thus obtaining a single wide work area from 150 mm to 3000 mm. It has a “zero” function to define reference points for taking relative measurements. The electronic gauge has its own data interface to save measured values to a memory module or to the control unit or to transfer them to a PC via Bluetooth connection.

Other Products