Comet  S4 I

4-axis CNC machining centre designed for working bars or parts in aluminium, PVC, light alloys in general and steel up to 4 m. The machine is equipped with independent motorized vices that allow positioning the vices in concurrent operation time. The 4th NC axis allows the electrospindle to rotate from –120° to +120° on the horizontal axis and position itself at any intermediate angle. The machine can therefore perform machining operations on the top and on all side faces of the profile at any angle within the range. It is equipped with a 12-place tool magazine, on the X axis gantry, able to host also one milling disc. It also has a mobile work table that facilitates the workpiece loading/unloading operation and significantly increases the workable section.

Technical data arrow_drop_down
AXIS STROKES 
X AXIS (longitudinal) (mm)
3.950
Y AXIS (transversal) (mm)
1.000
Z AXIS (vertical) (mm)
450
A AXIS (rotation on electrospindle horizontal axis)
-120° ÷ +120°
ELECTROSPINDLE 
Maximum power in S1 (kW)
8,5
Maximum power in S6 (60%) (kW)
10
Maximum speed (rpm)
24.000
Toolholder cone
HSK - 63F
Automatic tool holder coupling
 
Electrospindle controlled on 4 axes with the possibility of simultaneous interpolation
 
Cooling with heat exchanger
 
WORK AREA 
TAPPING CAPACITY (with tap on aluminium and through hole) 
With compensator
M8
Stiff (optional)
M10
WORKPIECE LOCKING 
Standard number of pneumatic vices
4
Maximum number of pneumatic vices
6
Independent motorised vices
 
AUTOMATIC TOOL MAGAZINE ON BOARD THE GANTRY 
Maximum number of magazine tools
12
Maximum diameter of the blade that can be inserted in the magazine (mm)
Ø = 250
SAFETY DEVICES AND PROTECTIONS 
Machine integral protection booth
 
Laminated protection glass
 
Retractable side protection tunnels
 
FUNCTIONS 
Multi-piece operation
 
Extended machining, up to twice the maximum nominal length in X
 
Basic multi-step machining - up to 5 steps
 
Workpiece rotation for machining on 4 sides
 
Multi-piece mode machining in Y
 
Included       
Available
4 axes electric head -S-
The 8.5 kW electrospindle in S1 with high torque also enables performing the heavy machining typical of the industrial sector. A 10.5 kW electrospindle with encoder for rigid tapping is available as optional. Electrospindle rotation along A axis allows working on 3 sides of the profile, with no need of repositioning. Normally used for machining extruded aluminium profiles, it also enables machining steel profiles thanks to the twin tank lubrication system: one with minimal oil diffusion, and the other with oil emulsion spray.
Comet S4 I 4 axes electric head -S- Emmegi
Operator interface
The possibility of rotating the monitor on its vertical axis allows the operator to view the screen from any position. The user interface has a 24” touchscreen display in 16:9 format, portrait mode, equipped with the necessary USB connections for PC and CNC remote interfaces. It also features an operator panel, mouse, and it is set up for connecting barcode reader and remote operator panel.
Motorized vices
The motorized vices, each equipped with its own motor, can be positioned independently in the work area. The CNC manages the movement of vices and that of electrospindle head simultaneously, in the two different work areas in double operation mode. This enables significant productivity gains. Using absolute reference axes allows reducing the initialisation time required every time the machine is restarted.
Comet S4 I Motorized vices Emmegi
Comet S4 I Pneumatic stops Emmegi
Pneumatic stops
The machine is equipped with strong stops allowing bar reference. One is positioned on the left side (standard) and the other on the right side (optional). Each stop is activated by a pneumatic cylinder, it is retractable type and is automatically selected by the machine software according to the machining to be performed. In short, double stop offers the advantage to load more profile pieces for multi-piece mode machining as well as the possibility to reposition the bar or the piece and perform machining on particularly long profiles.
Tool magazine

The tool magazine is integrated on the X axis, in the lower part and behind the electrospindle. It allows great reduction of tool change times. This function is particularly useful in the extrusion head and tail machining, avoiding the stroke to get to the magazine, as it moves simultaneously with the electrospindle and its positions. The magazine can contain up to 12 tool holders with relevant tools, which can be set at the operator’s discretion. Each position of the tool holder is provided with a sensor detecting the correct cone position.

Comet S4 I Tool magazine Emmegi
Comet S4 I Foldaway tunnel Emmegi
Foldaway tunnel
Integrated with the machine’s aesthetics and design, thanks to the perforated sheet metal for transparency and lightness, the tunnel opens and closes as needed. As its length can be reduced when not in use, it helps save space at the workshop. The outlet for the chip conveyor belt and its engine are built into the lower section, in view of an aesthetic and functional design.
Label printer (Optional)

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Comet S4 I Label printer Emmegi

Other Products